For thin doors less than 3-1/2"

EMBOSSED HOLES!

Double catch door latch. Use with our Latch Install Set part no. 201

For doors that do not have an inner structure to weld to.
Includes 2 pieces. 18GA mild steel. 36" Long / Base 7-1/2" / Tall Side 3-1/2" / Short Side 1/2"

Use these levers to connect a square door handle shaft to the latch linkage. Lever is 2.5" long x .75" wide. Hole is 5/16" square. It can be used on a 1/4" shaft or you can file the hole to fit a shaft larger than 5/16". Zinc coated mild steel. Must be drilled to accept linkage rod.